Lazarus and the Rich Man by Aaron Lee Benson

PIECE SPECIFICATIONS:

Stoneware, 94" × 34" × 15"

click photos to enlarge


HOMETOWN:

Jackson, Tennessee

Working mainly in stoneware clay, Benson produces large-scale architectural forms, as well as figurative, narrative monoliths.

FROM THE ARTIST:

Lazarus and the Rich Man finds its context in one of the parables of Christ as he describes the afterlife. In the parable one man, the rich man, is very wealth and has obtained great status here on earth. The other, Lazarus, was a pauper here on earth. However, at death, the two men find their lives reversed. Lazarus is now found in contentment in the "bosom of Abraham"; while the rich man suffers in separation from God.

Two great issues arise in this parable that I have tried to deal with in the work. One is that in the parable Christ describes "a great gulf" that separates the parties and neither can "cross over" to the other. The second is that the rich man now longs for a single drop of water to satisfy his greatest desire. This is a great and troubling truth that often clarifies for humans the reality of the human experience. Our desires can often change drastically depending on our circumstances to make the mundane priceless and wealth of no consequence. In a world driven by wealth, economics and greed it is always important to remember the fleeting nature of all things.

The work continues to clarify my love affair with form, specifically the arch. I believe it to be the greatest single form developed by man. I continually use it in my work. This work is an upside down arch. Thus how truth is often turned upside down.

Guardian by Wayne Trapp

PIECE SPECIFICATIONS:

Corten Steel, 156" × 46" × 52"

click photos to enlarge


HOMETOWN:

Vilas, North Carolina

FROM THE ARTIST:

"Space is a critical part of sculpture. If you agree that space exists and then break it apart by projecting into it, is that not a contradiction or a denial of the reality of space? How does one avoid the contradiction? Calder tried with his moving wires. Picasso tried with wire structures that one actually walks into--but they don't work. The moment you put anything into space you consume space and it no longer exists. Then again, there are Gabo's clear forms. They exist while giving the illusion of not consuming space. Perhaps that's the road to travel, but where does it lead? Perhaps it leads to 'nothingness' — just the mind imagining that something exists."

Equation to Intimacy by Marie C. T. Lentsch

PIECE SPECIFICATIONS:

Stainless Steel, 120" × 50" 22"


HOMETOWN:

Waterloo, Iowa

FROM THE ARTIST:

"Creating is great....intimacy. I wanted to go vertical in this intimacy, from being a painter to being a sculptor, from a flat canvas of color to a shimmery vertical canvas of shiny steel. It was a seemingly simple step.

Give back the SKY!

I took a piece of chalk, kneeled down on the floor of the shop and I drew a circle around myself as far as I could reach. I wanted to know what my 20 (plus or minus) feet of diameter looked like, was the original wonder.

I found the arc of my existence, my aura, my energy field — this I just learned from my studies in Kundalini Yoga, seven years later!

I did some math and figured out the degrees and arc of this circle that my arm drew. I took two small squares of steel and rolled them into the same degree, and that is when the two sheets of steel began to dance.

I saw the invisible overlapping of the arcs of two circles and this is where this sculpture called Equation to Intimacy II began.

That space where these two circles arc and overlap — the two circles' intersection, where the centers touch…exactly.

In Sacred Geometry — Vesica Piscis. (I found this word later, too.) This almond, eye shaped space is called this. It is the space created. It is the common ground, the shared vision, between equals called: UNION.

Well, I was very interested in that! I often drew these two arc lines overlapping that make a kind of a fish, kind of a cradle, a sliver moon, in all my doodles, and I always fill the arc, the cradle with hand drawn stars — another of my favorite themes!

Then I took two sheets of 10 foot high stainless steel, with a cardboard cutout of this arc I drew on the ground. I took it and got it rolled. A man named Troy rolled it for me on this big roller; we eyeballed it, and then measured it with the cardboard pattern. Perfect!

Then, I cut two long strips of stainless steel and drew into them the pictographs of my heart. These 2 strips were to hold the piece together, but mainly they were to be like two gills — a place to breathe, to send breath up and down and between.

The messages were inscribed on these panels. Not conscious or obvious messages, just what came out of my drawing. With the fire of the plasma torch, I cut these in. It is good to have space to breathe, and to breathe together, in union.

I polished the surface so it would be full of energy, to be sourced at all times, and it gives it a holographic feel and a depth of fascination. It is smooth to the touch, it is irresistible sometimes.

Call it a vertical river of dancing light. A commitment to do the equation, each side must do their own part of this equation, but it is all complete; whether one is doing it with a pencil in long hand, or is lightning fast and can do it with a couple of symbols and letters. Like Einstein decanted, it always all adds up to union and it is about equality."

Bali Ho by Dan Johnson

PIECE SPECIFICATIONS:

Colored Concrete, Steel, 103" × 25" × 20"

click photos to enlarge


HOMETOWN:

Alto Pass, Illinois

FROM THE ARTIST:

"The sail like structure represents the idea of travel. Just before building this sculpture my wife and I visited Bali, the Indonesian Hindu Island. The stacked concrete base is my attempt to relive the fun of childhood stacking. So with Bali Ho I mix the wonder of childhood play with the adventure of foreign travel."

Wind Harp by Wayne Trapp

PIECE SPECIFICATIONS:

Stainless Steel, 144" × 77" × 48"

click photos to enlarge


HOMETOWN:

Vilas, North Carolina

FROM THE ARTIST:

"I have always believed that public sculpture should be both lyrical and serious. Ideally, it should offer hope and provide something for the viewer's imagination to play with. Art for me has to be fun. I feel that "Wind Harp" is an aesthetically pleasing form to admire yet it also represents a musical instrument. Although it makes no sound, one can imagine the tunes that could be played on it."

Sky Keeper by Glenn Zweygardt

PIECE SPECIFICATIONS:

Cast Bronze, Cast Glass, Stone, 109" × 42" × 44"

CREATION DATE:

2010

click photos to enlarge


HOMETOWN:

Alfred Station, New York

FROM THE ARTIST:

"Sky Keeper is about relationships; the comparisons that can be made between species, family members, groupings and gatherings. Also, I enjoy vertical forms and the ways the ends can be developed. I enjoy working with earthen materials and the challenges of solidity and weight that come from granite, solid steel, cast glass and solid cast bronze. Further, I want to tell stories and comment on my collective life experience and perception of a collective consciousness."

Samuel's Altar by Shawn Morin

PIECE SPECIFICATIONS:

Mixed Granites, 71" × 32" × 32"

CREATION DATE:

2009

click photos to enlarge


HOMETOWN:

Weston, OH

STUDIO LOCATION:

Bowling Green, OH

HOW LONG HAVE YOU BEEN SCULPTING?

28 years

WHAT GOT YOU INTO THIS MEDIUM?

A natural progression from marble and limestone and the lifelong of influence growing up in New Hampshire, "The Granite State."

WHERE DID THE INSPIRATION FOR THIS SELECTED PIECE DERIVE?

1 Samuel 7:12 in the Holy Bible

TELL US ABOUT THE CHALLENGES ASSOCIATED WITH CRAFTING THIS PIECE.

Fitting several separate pieces together in stone can be a bit challenging.

HOW LONG DID IT TAKE YOU TO COMPLETE THIS PIECE?

I don't generally keep track of how long pieces take to complete.

HOW DO YOU WANT THE SCULPTURE GARDEN AUDIENCE TO LOOK AT YOUR WORK?

First from a purely visual experience, then from a conceptual experience.

WHAT WOULD YOU HOPE THE AUDIENCE TAKES AWAY FROM YOUR PIECE?

An appreciation of the material, the composition and the inspiration of the Biblical passage from which it is derived.

WHAT OTHER ARTISTS INSPIRE YOU?

Christop Spath, John Iserwood, Donald Davis, Isamu Nogouchi, Walter Duesenberry and Jesus Morales to name a few . . .

WHY DO YOU DO THE WORK YOU DO?

The task of every man is to find the work God has laid before him and to do that work faithfully.

WHERE DO YOU HAVE OTHER WORKS?

I have work in over 50 public and private collections around the country and in several shows currently.

HOW DO YOU FINANCE THE WORK THAT YOU DO?

The granite is donated and rest of the material comes out of my paycheck.

Shadow Cast by Davis Whitfield IV

PIECE SPECIFICATIONS:

8'h × 3'w × 2'd

CREATION DATE:

January 2011


HOMETOWN:

Mountain City, Tennessee

STUDIO LOCATION:

Mountain City, Tennessee

HOW LONG HAVE YOU BEEN SCULPTING?

11 Years

WHAT GOT YOU INTO THIS MEDIUM?

As a result of a 3-dimensional design class (by Ron Koehler) I got my first exposure to sculpture and immediately fell in love.

WHERE DID THE INSPIRATION FOR THIS SELECTED PIECE DERIVE?

I often try to see things in life through a different set of eyes, objects that we encounter on a day-to-day basis ranging from living organisms to the machines and buildings we co-exist with. Often with a turn of the head, we see a blur of images, harsh straight lines, meddling into gentle, organic curves. This particular sculpture captures this exact moment, a shadow cast from a couple I noticed while walking on the beach. Their shadow elongated and abstracted along the shoreline.

TELL US ABOUT THE CHALLENGES ASSOCIATED WITH CRAFTING THIS PIECE.

The most challenging aspect of this piece was the clean-up as a result of the intricate in-sets that were included.

HOW LONG DID IT TAKE YOU TO COMPLETE THIS PIECE?

About three weeks.

HOW DO YOU WANT THE SCULPTURE GARDEN AUDIENCE TO LOOK AT YOUR WORK?

With an open mind. I would like it to be viewed through a youthful lens.

WHAT WOULD YOU HOPE THE AUDIENCE TAKES AWAY FROM YOUR PIECE?

Honestly, I want the audience to take whatever they want out of the piece. I hesitate to speak on my inspiration for pieces as I want the viewer to have their own interpretation without it being swayed by my original purpose.

WHAT OTHER ARTISTS INSPIRE YOU?

Henry Moore, Constantin Brancusi, David Smith and of course, Wayne Trapp, my mentor.

WHY DO YOU DO THE WORK YOU DO?

Because I love it, I honestly wouldn't know what else to do!

WHERE DO YOU HAVE OTHER WORKS?

Chapel Hill, NC, Salisbury, NC, Boone, NC, Bristol, VA, Knoxville, TN, Oak Ridge, TN

HOW DO YOU FINANCE THE WORK THAT YOU DO?

These sculpture competitions allow me to purchase the raw materials for the next sculpture I make.

Eyes of the Storm by Bryan W. Massey

PIECE SPECIFICATIONS:

10' × 5' × 2'

CREATION DATE:

March 2008

click photos to enlarge


HOMETOWN:

Conway, AR

STUDIO LOCATION:

Conway, AR

HOW LONG HAVE YOU BEEN SCULPTING?

32 Years

WHAT GOT YOU INTO THIS MEDIUM?

What got me into this particular medium was the challenge of manipulating the cold, flat, hard steel with fire and hammers and making it bend to the will of my creative vision.

WHERE DID THE INSPIRATION FOR THIS SELECTED PIECE DERIVE?

The inspiration for this selected piece derived from the tragedy of Hurricanes "Katrina" and "Rita." After such devastating loss of life and property, our country pooled together to assist those that needed it most. It's my contribution to the year 2005 which saw a record number of hurricanes that year.

TELL US ABOUT THE CHALLENGES ASSOCIATED WITH CRAFTING THIS PIECE.

The main challenge associated with crafting this piece was the amount of physical strength required to "muscle" the flat steel into curves and bends. Even with the use of fire, there still was the challenge to bend the steel while it was red hot and not to bend it as it cools because it could cause stress in the metal and crack.

HOW LONG DID IT TAKE YOU TO COMPLETE THIS PIECE?

I usually don't count the hours anymore. I just work until it's finished, but I would say from start to finish, 6 - 8 weeks.

HOW DO YOU WANT THE SCULPTURE GARDEN AUDIENCE TO LOOK AT YOUR WORK?

I want the Sculpture Garden audience to look at my work and say to themselves "How did he do that?" I want them to read the title and see the abstract swirling affect of the hurricane and that the five rings represent the two major and three minor hurricanes of 2005.

WHAT WOULD YOU HOPE THE AUDIENCE TAKES AWAY FROM YOUR PIECE?

I hope that the audience takes away from my piece a greater appreciation for the men and women that work in this type of medium. I want them to reflect upon those that did lose everything and can appreciate what they have and treasure it.

WHAT OTHER ARTISTS INSPIRE YOU?

Other artists that inspire me are many, but the main four are: Henry Moore, Isamu Noguchi, Constantine Brancusi and Richard Hunt out of Chicago. Richard Hunt — because he was the first African American Sculptor that I became aware of and after contacting him, we became friends.

WHY DO YOU DO THE WORK YOU DO?

I do the work that I do because of my deep down belief that when God blesses you and gives you a certain talent, it's our responsibility to share it with others in a positive light. Besides, I love the challenge of looking at a tree stump, or a block of stone, or sheets of metal and turning them into works of art. Where other people just look at things, I see things.

WHERE DO YOU HAVE OTHER WORKS?

I have other works in several places around the US. I have work in Oklahoma, Texas, North Carolina, South Carolina, Georgia, Alabama, Illinois, Kansas, Maryland, Louisiana, Wisconsin, Missouri, and one internationally, in Germany.

HOW DO YOU FINANCE THE WORK THAT YOU DO?

I finance the work that I do through my position as a Professor of Art at the University of Central Arkansas as well as through sales, commissions, and grants.

Start Paddling by Nathan S. Pierce

CREATION DATE:

2010

click photos to enlarge


HOMETOWN:

Cape Girardeau, MO

STUDIO LOCATION:

Cape Girardeau, MO

HOW LONG HAVE YOU BEEN SCULPTING?

Five years.

WHAT GOT YOU INTO THIS MEDIUM?

Coming out of my undergraduate program at Southeast Missouri State, I was introduced to a new sculpture professor who encouraged me to try something new with my BFA project. Up until then, I was sculpting mostly from wood - probably because I was comfortable with that material coming from a construction background.

WHERE DID THE INSPIRATION FOR THIS SELECTED PIECE DERIVE?

My religion is nature and I spent a lot of time that summer canoeing up and down the rivers but at the same time I was also going through some personal struggles concerning where I was going in life, or was I going anywhere?

TELL US ABOUT THE CHALLENGES ASSOCIATED WITH CRAFTING THIS PIECE.

The challenge was self-discovery. This particular piece has a very personal narrative attached to it.

HOW LONG DID IT TAKE YOU TO COMPLETE THIS PIECE?

Working on and off, a couple of months.

HOW DO YOU WANT THE SCULPTURE GARDEN AUDIENCE TO LOOK AT YOUR WORK?

As long as it makes people think, that's the point.

WHAT OTHER ARTISTS INSPIRE YOU?

One thing that does it for me is coming to installations at art programs like this one and being introduced to work that I may otherwise have never seen. I also draw from history. Mark DiSuvero and John Henry are definitely an inspiration to a young public artist like myself, and I enjoy the fact that they are still hands on with their work unlike a lot of artist that are out there today. That is something that definitely inspires me!

WHY DO YOU DO THE WORK YOU DO?

I'm looking for answers in life just like everyone else. These sculptures are my thought process.

WHERE DO YOU HAVE OTHER WORKS?

Oak Park Sculpture Walk, Oak Park, IL, SPACES Sculpture Trail Biennial, Huntsville, AL, Olathe Downtown Sculpture Exhibition, Olathe, KS, Wayne State College Sculpture Competition, Wayne, NE, Art in Motion, Missouri Valley College, Marshall, MO, Sculpture Walk 2011, Sioux Falls, SD, Public Art League, City of Champaign/Urbana, IL, Decatur Sculpture Walk, Decatur, IN

HOW DO YOU FINANCE THE WORK THAT YOU DO?

Unfortunately, sculpture doesn't pay all the bills, so I have a small construction business to help fund some of the larger sculptures and public art programs like this help fill in the blanks.

Homage to Gus - Glenn Zweygardt

PIECE SPECIFICATIONS:

Marble, Granite, Stainless Steel, Steel, Cast Bronze, Cast Glass 11’-6”H x 5’-0”W x 2’-0”D

WEIGHT:

2,000 LB

ADDITIONAL DETAILS:

Top Element Rotates 360 Degrees.

CREATION DATE:

2012

click photos to enlarge


 

HOMETOWN:

Saint Francis, Kansas

STUDIO LOCATION:

Alfred Station, New York

HOW LONG HAVE YOU BEEN SCULPTING?

65 years.

WHAT GOT YOU INTO THIS MEDIUM?

Love of stone, knowledge of welding from age 10 and a lifetime intrigue with ceramics and glass.

WHERE DID THE INSPIRATION FOR THIS SELECTED PIECE DERIVE?

The inspiration for Homage to Gus emerged from the loss of my father, Gus, who lived to the age of 99.

TELL US ABOUT THE CHALLENGES ASSOCIATED WITH CRAFTING THIS PIECE.

Challenges in the making of Homage to Gus occurred with dealing with the massive weight of the base and the precision of the top element fitting into the bottom element.

HOW LONG DID IT TAKE YOU TO COMPLETE THIS PIECE?

It took about 18 months to complete the sculpture.

HOW DO YOU WANT THE SCULPTURE GARDEN AUDIENCE TO LOOK AT YOUR WORK?

I’d like my audience to view my sculpture with an open mind.

WHAT WOULD YOU HOPE THE AUDIENCE TAKES AWAY FROM YOUR PIECE?

I hope the viewer understands that I knew my father well and loved him a lot.

WHAT OTHER ARTISTS INSPIRE YOU?

Inspiring artists are David Smith and Isamu Noguchi.

WHY DO YOU DO THE WORK YOU DO?

Creating is the ultimate expression of freedom. Making sculpture is my passion. When I begin creating a concept for public artwork, it is an evolutionary process. The request for proposal generally states the mission of the project and what hopes to be achieved with the public art piece. The journey begins as an artist, the moment I attempt to translate the project concept into a vision that can be realized into sculptural form. When the form is received and understood, then the process is successful and extremely rewarding for everyone involved along the way, and for years to come when one engages with the work of art.

WHERE DO YOU HAVE OTHER WORKS?

My sculptures are in Canada, China, Italy, UK & the following states: AZ, CA, CN, FL, IL, IN, KS, KY, MA, MI, MS, NC, NJ, NM, NY, PA, TN, VA, VT.

HOW DO YOU FINANCE THE WORK THAT YOU DO?

I finance my work through a pure entrepreneurial spirit driven by sales, trades, gifts and a lasting background in F.F.A. (Future Farmers of America).

Contemplating Passage by John Ellis

PIECE SPECIFICATIONS:

Fabricated stainless steel 5’3” tall × 4’ wide x 3’5” deep

CREATION DATE:

2013

click photos to enlarge


HOMETOWN:

Jackson, MO

STUDIO LOCATION:

Batesville, AR

HOW LONG HAVE YOU BEEN SCULPTING?

I have been making objects most of my life. Creating sculpture has been a full-time endeavor for the last seventeen years.

WHAT GOT YOU INTO THIS MEDIUM?

I have made things all my life. Welding and fabricating are second nature to me and proved to be a very complete genre for me to enter into the making of art. Stainless steel is my choice of material for making sculpture due to its capacity to endure the elements of nature. I also like the ability it possesses to reflect the colors of the sky and whatever else happens to surround the pieces.

WHERE DID THE INSPIRATION FOR THIS SELECTED PIECE DERIVE?

The inspiration for a specific piece is a hard thing for me to pin down as they are all a part of a stream. In my work as well as in my life, I am trying to understand the duality of life and find a balancing position between the opposites which coexists in our lives. If I were to try and explain the goal of my sculpture throughout my career, I would say it has been to make something beautiful, which contains opposites, balanced in a moving, yet static composition.

TELL US ABOUT THE CHALLENGES ASSOCIATED WITH CRAFTING THIS PIECE.

The difficulties involved in creating a piece of sculpture usually are generally straightforward problem solving once the project has begun. However, overcoming the question of why to do something which consumes large amounts of time and money without any idea of a knowable outcome is particularly difficult for me. This is a very basic question which requires an answer and/or a bit of rationalization. Another area of difficulty for me is how to maintain a balance between the consumptive nature of creation and the responsibilities of participating in life as a fully functioning human being.

HOW LONG DID IT TAKE YOU TO COMPLETE THIS PIECE?

My pieces generally take between two and three months to create. Each piece requires a good deal of labor. However, the process of completion is rather vague. Is a piece complete just because it is made? Works of art have lives much like us. After the creation stage, one must find someone or somewhere to exhibit the piece and perhaps a buyer who will take care of the sculpture. If someone purchases a piece, I suppose they are then completed. However, even then I am hopeful of good stewardship . . .

HOW DO YOU WANT THE SCULPTURE GARDEN AUDIENCE TO LOOK AT YOUR WORK?

David Smith, the American sculptor, answered this question as well as the question can be answered. He was asked in an interview the question for whom he made his work. The following is his reply and my hope for viewers of my work:

"If you ask for whom do I make art, I will say for all who approach it without prejudice."

(Statement made at a forum held by the New York Herald Tribune and the New York City Board of Education, March 19, 1950.)

To view my work with an open mind and spirit is all I can ask of those seeing my work.

WHAT WOULD YOU HOPE THE AUDIENCE TAKES AWAY FROM YOUR PIECE?

This is a question which leads to another question. What should my hope be? I have thought about this often and have not produced an iron-clad answer. Art in general has the capacity to engage us in unknown ways. From the cave paintings to Pollack's swirling masterpieces and on into today's work, curators and historians have tried to explain to us what to think regarding the viewing of works of art, yet there is no way of being certain about any of it. My most basic, and I feel realistic hope, would be for someone to walk away with a sense of curiosity. The stage of curiosity is the beginning of many good things in our exploration of life.

WHAT OTHER ARTISTS INSPIRE YOU?

The work of other artists is not something in which I find a great deal of inspiration. For me the lives of artists both past and present have proven to be a source for finding direction. The stories of artists’ lives are full of accomplishments, struggles, and tragedies much like everyone's lives. These stories offer insight on how one makes it through the difficulties encountered in living life as well as making art. I have found the close relationships I have made in my career to be the most rewarding aspect of being an artist.

WHY DO YOU DO THE WORK YOU DO?

I began working as a sculptor as a way to participate in life on a larger scale. I live and had lived somewhat of a contemplative life and was looking for ways to engage people and share ideas, thoughts, and feelings. In my early works I was hopeful of expressing my ideas through the meaning of the pieces. As I continue on my journey, my point of view has taken a different path. A piece of sculpture can possess an idea or meaning; however, I question whether any work can express a specific thought without words. To me words are the antithesis of visual art. My work over the last several years has been to try and create things of beauty from which a conversation between the viewers can begin. The purpose of making my work is my way of participating in the conversation of life.

“When I begin creating a concept for public artwork, it is an evolutionary process. The request for proposal generally states the mission of the project and what hopes to be achieved with the public art piece. The journey begins as an artist, the moment I attempt to translate the project concept into a vision that can be realized into sculptural form. When the form is received and understood, then the process is successful and extremely rewarding for everyone involved along the way, and for years to come when one engages with the work of art.”

WHERE DO YOU HAVE OTHER WORKS?

I am represented by Shidoni Gallery and Sculpture Garden in Santa Fe, New Mexico. You will find my work there and on the web at www.steelmeditations.com. In the Mid-South you may view my work in the collection of the city of Hot Springs, Arkansas and in the collection of The Historic Arkansas Museum in Little Rock. My work is in private collections in the Mid-South as well as in private collections around the country.

HOW DO YOU FINANCE THE WORK THAT YOU DO?

I think this question falls under the category of "It's difficult." The making of art requires energy, time, and money. For me the first two are somewhat governed by the lack of or ample supply of the third. Making money to finance my work is basically a constant struggle that requires sales of my work whether it is sculptures or photographs. The demands of being an artist are very inclusive. In order to make the income from sales go as far as possible, I find myself doing much more than making sculpture. The job requirements would read something along these lines: artist, who can also weld and fabricate stainless steel, who also can take photographs of sculpture, who can incorporate the photographs into a basic website design, who can also make presentations, as well as staying in touch with dealers and checking out possibilities for exhibits. Being an artist is a very full-time position for me, which requires commitment and sacrifice from me as well as from the people who surround me.

Pharaoh by Aaron P. Hussey

PIECE SPECIFICATIONS:

Corten steel, bronze, stainless steel; 6' 2" x 1'4" x 10" ~ 100 lbs

CREATION DATE:

2008

click photos to enlarge


HOMETOWN:

New Orleans, LA

STUDIO LOCATION:

Baton Rouge, LA

HOW LONG HAVE YOU BEEN SCULPTING?

I have been a professional artist for 31 years.

WHAT GOT YOU INTO THIS MEDIUM?

Metals became a strong interest because of the processes involved, the durability and structural presence.

WHERE DID THE INSPIRATION FOR THIS SELECTED PIECE DERIVE?

Pharaoh is inspired by historical use of the figure as part of architecture and the artifacts buried with deceased.

TELL US ABOUT THE CHALLENGES ASSOCIATED WITH CRAFTING THIS PIECE.

The challenges were finding the balance between the figurative and the architectural components as well as balancing the varied materials.

HOW LONG DID IT TAKE YOU TO COMPLETE THIS PIECE?

The work was completed over several months; creating the figurative part in wax, then taking it through the bronze casting process and choosing and manipulating the corten steel, stainless steel and secondary bronze.

HOW DO YOU WANT THE SCULPTURE GARDEN AUDIENCE TO LOOK AT YOUR WORK?

As with all of my art, I want the audience to approach the work with their own life experiences and thoughts.

WHAT WOULD YOU HOPE THE AUDIENCE TAKES AWAY FROM YOUR PIECE?

The audience members should take from the work an individual response that relates to their world.

WHAT OTHER ARTISTS INSPIRE YOU?

I enjoy the work of August Rodin and Alberto Giacometti and inspiration comes from many forms—nature, architecture and history.

WHY DO YOU DO THE WORK YOU DO?

I am compelled to do this work. When I begin creating a concept for public artwork, it is an evolutionary process. The request for proposal generally states the mission of the project and what hopes to be achieved with the public art piece. The journey begins as an artist, the moment I attempt to translate the project concept into a vision that can be realized into sculptural form. When the form is received and understood, then the process is successful and extremely rewarding for everyone involved along the way, and for years to come when one engages with the work of art.

WHERE DO YOU HAVE OTHER WORKS?

I have permanent sculptures in public collections of Clackamas County, OR; Little Rock, AR; Chattanooga, TN; Hattiesburg, MS; Metairie, LA; Grand Isle, LA; Jean Lafitte, LA; Covington, LA; Glenview, IL; Suwanee, GA; and Tempe, AZ. Additionally, I have work in private collections across the USA. I am currently working on a piece for San Marcos, TX.

HOW DO YOU FINANCE THE WORK THAT YOU DO?

I make a living from my art.

Zipcode by Greely Myatt

PIECE SPECIFICATIONS:

Aluminum signs, aluminum, and concrete

CREATION DATE:

2012

click photos to enlarge


HOMETOWN:

Amory, Mississippi

STUDIO LOCATION:

Memphis, TN

HOW LONG HAVE YOU BEEN SCULPTING?

40 years.

WHAT GOT YOU INTO THIS MEDIUM?

Floyd Shaman at Delta State University.

WHERE DID THE INSPIRATION FOR THIS SELECTED PIECE DERIVE?

From art history and the vernacular environment in which I live and work.

TELL US ABOUT THE CHALLENGES ASSOCIATED WITH CRAFTING THIS PIECE.

Each piece has its on challenges. With zipcode, it was in the fitting of the pieces.

HOW LONG DID IT TAKE YOU TO COMPLETE THIS PIECE?

One month.

HOW DO YOU WANT THE SCULPTURE GARDEN AUDIENCE TO LOOK AT YOUR WORK?

With an open mind and a happy heart!

WHAT OTHER ARTISTS INSPIRE YOU?

All of them!

WHY DO YOU DO THE WORK YOU DO?

I love doing it. When I begin creating a concept for public artwork, it is an evolutionary process. The request for proposal generally states the mission of the project and what hopes to be achieved with the public art piece. The journey begins as an artist, the moment I attempt to translate the project concept into a vision that can be realized into sculptural form. When the form is received and understood, then the process is successful and extremely rewarding for everyone involved along the way, and for years to come when one engages with the work of art.

WHERE DO YOU HAVE OTHER WORKS?

US, The Netherlands, Dubai, China.

HOW DO YOU FINANCE THE WORK THAT YOU DO?

Teaching and private sells.

The Cycle by Hanna Jubran

PIECE SPECIFICATIONS:

10’x 5’x 4’

CREATION DATE:

2011

click photos to enlarge


HOMETOWN:

Grimesland, North Carolina

STUDIO LOCATION:

Grimesland, North Carolina

HOW LONG HAVE YOU BEEN SCULPTING?

Over the past thirty years, I have been exhibiting large-scale sculpture throughout the United States.

WHAT GOT YOU INTO THIS MEDIUM?

I have always been interested in sculpture and three dimensional forms.

WHERE DID THE INSPIRATION FOR THIS SELECTED PIECE DERIVE?

The Cycle is from a series of sculpture I have been creating for the past five years. This work represents the cycle of the seasons and the four elements (Earth, Water, Wind and Fire). The orange color represents warmth, heat and growth. This is a more universal meaning. The overall form represents a gate that has opened and is pivoting on the earth. The two forms are in opposition to each other and are placed to create a dynamic sculptural composition.

TELL US ABOUT THE CHALLENGES ASSOCIATED WITH CRAFTING THIS PIECE.

If a goal is sought either consciously or unconsciously in the form of a work of art, one must solve innumerable problems and make innumerable decisions in order to achieve that end. One of many decisions I have made is maintaining and preserving the natural quality of the materials I work with. This sculpture was cut out of 11-gauge sheet steel then welded into its final form. The base is constructed of 1/4" steel plates with four anchors to hold it to the concrete pedestal and requires a crane to lift it into place.

HOW LONG DID IT TAKE YOU TO COMPLETE THIS PIECE?

One Month.

HOW DO YOU WANT THE SCULPTURE GARDEN AUDIENCE TO LOOK AT YOUR WORK?

The placement at the Art Center identifies it as a unique piece for the students and faculty. Although this sculpture is painted specific colors, it changes depending on the time of day and season. It also changes as you move around the sculpture and its relation to the surrounding architecture and landscape. Between nature and the sculpture, I am condensing time and space. They are ever changing.

My interest in exhibiting large outdoor sculpture is being part of the environment and landscape, so that the public can enjoy the work and see the changes throughout the season. These sculptures are from a series of work that deals with the concept of nature, the seasons and the four elements; Earth, Water, Fire and Wind in our universe on the micro and the macro level. It expresses the cycle of life, growth and continuum.

WHAT WOULD YOU HOPE THE AUDIENCE TAKES AWAY FROM YOUR PIECE?

The Cycle is from a series of sculpture I have been creating for the past five years. My interest in the four elements and nature gave me the opportunity to explore one of the most interesting forces; it is that moment of separation, escaping and attraction toward each other. Where the landscape moves all the time so that viewpoints constantly change, passages open and close, the relationship of those forms compliment the positive and negative space the sculpture contains. I am conscious of the impact these sculptures will carry. The viewer will regard the work a contribution to contemporary sculpture because of the visual weight and aesthetic qualities.

WHAT OTHER ARTISTS INSPIRE YOU?

Isamu Noguci, Pomodoro, David Smith

WHY DO YOU DO THE WORK YOU DO?

My Goals: (1) To continue exhibiting and participating in symposiums and conferences on national and international level.(2) To make the public aware of the new exhibitions and to stimulate interest in public art and local schools.(3) The maintenance of high quality work and craftsmanship.(4) A commitment to national and local exhibitions. Providing lectures and workshops in academic and professional fields.(5) Promoting public art.(6) The continued development of my research and creative work.

WHERE DO YOU HAVE OTHER WORKS?

Symposiums. My most recent accomplishments have included the participation in the following places, Art in the City Plaza in Raleigh, Cary outdoor Sculpture, Kingsport Tennessee, Lakeland Florida and several more. Most recent symposiums: Hojer Denmark, Granby Canada, Breckenridge Colorado, St. Blasien Germany, Tultepec Mexico all of which were International woodcarving or welded steel symposiums.

HOW DO YOU FINANCE THE WORK THAT YOU DO?

Unfortunately, sculpture doesn't pay all the bills, so I have a small construction business to help fund some of the larger sculptures and public art programs like this help fill in the blanks.

Charm by Deedee Morrison

Piece Specifications:

Limestone and Powder Coated Aluminum with LED Lighting

Creation Date:

2013

click photos to enlarge


HOMETOWN:

New Orleans, LA but have lived in Birmingham, AL for 20 years

STUDIO LOCATION:

Wade Sand and Gravel Quarry in Birmingham, AL

HOW LONG HAVE YOU BEEN SCULPTING?

12 years

WHAT GOT YOU INTO THIS MEDIUM?

Evolution of my work - I started introducing CNC (computer numeric cutting) processes into my work and through that came the introduction of light - LED and solar.

WHERE DID THE INSPIRATION FOR THIS SELECTED PIECE DERIVE?

The Charm sculpture series focuses on the correlation of contrasts - two very different elements that are interrelated and combined to create equilibrium. The creation of the Charm sculptures begins with a limestone rock that has been harvested from the quarry where I work. I use laser-cutting processes with the metal that introduces light and a sense of weightlessness into the piece. Symbols, such as unevenly balanced objects joined, ask the question, "What am I bound to?" I work with this quality of extreme contrasts through the creation of bulky sculptures made of metal and boulders that are intricately balanced with hand wrought chains to create a sense of the weight of fragility and balance.

TELL US ABOUT THE CHALLENGES ASSOCIATED WITH CRAFTING THIS PIECE.

There are many moving parts to the Charm sculptures, a little like assembling a jigsaw puzzle. Each piece is laser cut then re-assembled in my studio. After they are welded the Charms are then powder-coated prior to the LED lighting being installed.

HOW LONG DID IT TAKE YOU TO COMPLETE THIS PIECE?

One month and I fabricated this piece in my studio. I either design or fabricate the pieces in my studio at Wade Sand and Gravel Quarry, or once the sculptures become too large in scope, I work with fabricators to construct my design and I oversee the project.

HOW DO YOU WANT THE SCULPTURE GARDEN AUDIENCE TO LOOK AT YOUR WORK?

Sculpture interwoven into the public realm can serve as a social catalyst and a way to reveal complex ideas and issues in an engaging way. I hope that my work inspires one to think about the interconnectivity of our lives and consider how the way we live directly and indirectly impacts our communities and our environment.

WHAT WOULD YOU HOPE THE AUDIENCE TAKES AWAY FROM YOUR PIECE?

As a sculptor and installation artist, my work has been heavily influenced by an interest in biological forms and light. Coupled with my interest in nature is a fascination for technical and scientific advances. As a result, a unique style has evolved that reflect my understanding of the natural world by using industrial materials, computer numeric cutting methods (CNC) and organically inspired designs to create solar powered light sculptures. By combining green consciousness with forward thinking and sustainable designs, each piece of artwork fabricated is a functional solar powered light sculpture that pays tribute to nature’s beautiful efficiency.

WHAT OTHER ARTISTS INSPIRE YOU?

I am endlessly intrigued by innovations in science and how that affects the arts and vice versa - the relationship between the two.

WHY DO YOU DO THE WORK YOU DO?

My studio is in the home of the Old Republic Steel Mill and what is now the Wade Sand and Gravel Quarry in the heart of the “Birmingham District.” For many of the sculpture projects that I work on, I incorporate limestone boulders that have been harvested from an area in the quarry with 600 million years of geological history. The process of harvesting the limestone brings a certain awareness and perspective to my work. The second element of influence is the backdrop of the old steel mill that brought in the industrial development of the whole region.

“When I begin creating a concept for public artwork, it is an evolutionary process. The request for proposal generally states the mission of the project and what hopes to be achieved with the public art piece. The journey begins as an artist, the moment I attempt to translate the project concept into a vision that can be realized into sculptural form. When the form is received and understood, then the process is successful and extremely rewarding for everyone involved along the way, and for years to come when one engages with the work of art.”

WHERE DO YOU HAVE OTHER WORKS?

Washington, California, Colorado, Texas, Oklahoma, Michigan, Florida, Alabama, Massachusetts, Maryland, Wisconsin, New York, Illinois, Tennessee, Utah.

HOW DO YOU FINANCE THE WORK THAT YOU DO?

The majority of my commissions come through public art programs and the work is commissioned by city municipalities, libraries, parks - etc. I do sell limited work through galleries.

Two Flames by Shawn Morin

Piece Specifications:

Cast Bronze Cast Stainless Steel, Fabricated Steel

Creation Date:

2010

click photos to enlarge


Hometown:

Weston, OH

Studio Location:

Bowling Green, OH

How long have you been sculpting?

Over 30 years.

What got you into this medium?

Experimentation, personality and the material’s properties, longevity and working characteristics.

Where did the inspiration for this selected piece derive?

The original idea centered on the tri-unity of God, as there is another flame that was part of the initial piece, which was called Three Flames.

How long did it take you to complete this piece?

About a month.

How do you want the sculpture garden audience to look at your work?

Viewers come to a work of art with their own interpretation and understanding. It is my contention that the creation of artwork is not unlike the creation of the universe. I hope that when people see my work, they come to an understanding that both the creation and viewing of artwork is a highly spiritual experience and as such, can point us back to God and his creative qualities.

What other artists inspire you?

There are so many artists that inspire me. Renaissance artists, Modern Artists and Contemporary artists alike all play into my inspirational motivations.

Why do you do the work you do?

Compulsion! The creative person has no choice but to create. It is in their biological, chemical, psychological and spiritual makeup.

Where do you have other works?

Through the USA and South Korea.

How do you finance the work that you do?

Sales and commissions mostly.